Description
- Waveshare 0.96inch OLED Display Module, 128x64 px, SPI/I2C (Yellow & Blue)
- Utilizes SPI/I2C communication for a fast data rate
- Compact design with an ultra-narrow bezel enhances the aesthetic appeal
- Compatible with Raspberry Pi, Arduino, STM32, and similar platforms
The Waveshare 0.96inch OLED Display Module, 128x64 px, SPI/I2C (Yellow & Blue) is a high-quality display module that features a resolution of 128x64. It utilizes SPI/I2C communication and is equipped with an embedded SSD1315 driver chip. This module is designed with a compact size and an ultra-narrow bezel, which enhances its aesthetic appeal.
The module is also equipped with an onboard voltage translator. It adopts 4-wire SPI and I2C interfaces, which not only ensure better compatibility but also facilitate a fast data rate. This display module is compatible with Raspberry Pi, Arduino, STM32, and other similar platforms.
- 1x 0.96inch OLED Module
- 1x Jumper Cable Female 7-Pin
- Display: 21.74 x 11.18 mm
- Module: 26 x 26 mm
- Pixel: 0.15 x 0.15 mm
- Screen: 0.96 inch
Website
- Operating voltage: 3.3 V / 5 V
- DISPLAY PANEL: OLED
- Resolution: 128 x 64 pixels
- Communication Interface: 4-wire SPI / I2C
- Driver: SSD1315
- Display color: (C) - upper yellow & lower blue
- Control Interface: RES Reset, low active
- DC Data/Command selection (high for data, low for a command)
- CS Chip selection, low active
- CLK Clock Input
- DIN Data Input
- GND Ground
- VCC Power (3.3V / 5V input)
- Weight: 9 g